Home > OLED Display Module >

Low Cost Small Size OLED Display 0.49 Inch I2C Interface For Handheld Application

Product Categories

Shenzhen Saef Technology Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Low Cost Small Size OLED Display 0.49 Inch I2C Interface For Handheld Application

Name: Low Cost Small Size OLED Display 049 Inch I2C Interface For Handheld Application
Brand: SAEF
Price: 0.65 USD

Quality Low Cost Small Size OLED Display 0.49 Inch I2C Interface For Handheld Application for sale

Brand Name : SAEF

Model Number : SFOS049XZ-7111AN

Certification : ISO9001 / ISO14000

Place of Origin : ShenZhen / China

MOQ : 3 pcs

Price : USD0.65-USD0.75; The price can be negotiated based on the quantity of the order.

Payment Terms : L/C, T/T, Western Union, Paypal

Supply Ability : 3000K pcs per month

Delivery Time : 1-5 weeks

Packaging Details : Standard Exportation Package

Product : 0.49 inch OLED display Module

Number of Pixels : 64x32 Graphics

Driver IC : SSD1315 or Equivalent

Display Mode : Passive Matrix

Display Color : Monochrome (white)

Drive Duty : 1/32 Duty

Panel Size : 14.5 x 11.6 x 1.227 (mm)

Active Area : 11.18 x 5.58 (mm)

Pixel Pitch : 0.175 x 0.175 (mm)

Pixel Size : 0.155 x 0.155 (mm)

Viewing Direction : All Viewing Angles

Interface : I2C

Connection : Soldering/Hotbar

Pin number : 14 pins (Can be customized）

Life time : 50,000 hours @60cd/m2

Compliance : REACH & RoHS Compliant

Contact Now

0.49 Inch OLED Display 64*32 Dots Product Introduction

0.49-inch OLED products are small display screens widely used in various smart devices and instruments due to their ultra-thin, low-power, high contrast, and wide viewing angle characteristics. A 0.49-inch OLED display typically has a 64x32 pixel dot matrix, capable of displaying white fonts, driven by an SSD1315 controller, supports I2C serial interface, and operates at 2.8V voltage. This type of display screen, due to the self luminous characteristics of OLED, does not require backlighting, thus having the advantages of ultra-thin body design and low power consumption. Their working temperature range is wide, from -40 ℃ to 85 ℃, and they are suitable for various environmental conditions. In addition, the 0.49-inch OLED display screen adopts FPC connection method, which facilitates direct soldering to the PCB without the need for connectors.

0.49-inch OLED products are highly suitable for devices with strict space requirements due to their compact size and high resolution. They are widely used in smart watches, health monitoring devices, small display screens for industrial control systems, portable game consoles, and other occasions that require small and efficient display screens. 0.49-inch OLED products have become one of the preferred solutions for modern small displays due to their unique technological advantages and wide application potential. With the maturity of technology and the expansion of the market, we can expect such products to play a more important role in future smart and electronic devices.

Features

Model number: SFOS049XZ-7111AN
Display Mode: Passive Matrix
Display Color: Monochrome (White)
Drive Duty: 1/32 Duty
Driver IC: SSD1315 or Equivalent
Number of Pixels: 64 × 32
Pin number: 14
Panel Size: 14.5 × 11.6 × 1.227 (mm)
Active Area: 11.18 ×5.58 (mm)
Pixel Pitch: 0.175 × 0.175 (mm)
Pixel Size: 0.155 × 0.155 (mm)

Product Drawing

Interface Pin Definition

Pin No.	Symbol	I/O	Function
PowerSupply
8	VDD	P	Power Supply for Logic This is a voltage supply pin. It must be connected to external source.
7	VSS	P	Ground of Logic Circuit This is a ground pin. It acts as a reference for the logic pins. It must be connected to external ground.
14	VCC	P	Power Supply for OEL Panel This is the most positive voltage supply pin of the chip. A stabilization capacitor should be connected between this pin and VSS when the converter is used. It must be connected to external source when the converter is not used.

Driver
12	IREF	I	Current Reference for Brightness Adjustment This pin is segment current reference pin. A resistor should between this pin and VSS. Set the current at 12.5μA maximum.
13	VCOMH	O	Voltage Output High Level for COM Signal. This pin is the input pin for the voltage output high level for COM signals. A capacitor should be connected between this pin and VSS.

DC/DC Converter
5	VBAT	P	Power Supply for DC/DC Converter Circuit This is the power supply pin for the internal buffer of the DC/DC voltage converter. It must be connected to external source when the converter is used. It should be connected to VDD when the converter is not used.
3/4 1/2	C1P/C1N C2P/C2N	I	Positive Terminal of the Flying Inverting Capacitor Negative Terminal of the Flying Boost Capacitor The charge-pump capacitors are required between the terminals. They must be floated when the converter is not used.

Interface
9	RES#	I	Power Reset for Controller and Driver This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation.
10	SCL	I	I2C Bus Data Signal The transmission if information in the I2C bus is following a clock sigmal. Each transmission of data bit is taken place during a single clock period of this pin.
11	SDA	I/O	I2C Bus Data Signal This pin acts as a communication channel between the transmitter and the receiver.

Reserve
6	VBREF	-	NC

Optics Characteristics

Characteristics	Symbol	Conditions	Min	Typ	Max	Unit
Brightness (VCC Supplied Externally)	Lbr	Note 5	160	-	-	cd/m2
Brightness (VCC Generatedby Internal DC/DC)	Lbr	Note 6	160	180	-	cd/m2
C.I.E. (White)	(x) (y)	C.I.E. 1931	0.25 0.27	0.29 0.31	0.33 0.35
Dark Room Contrast	CR		-	2000:1	-
Viewing Angle			-	Free	-	degree

DC Characteristics

Characteristics	Symbol		Conditions	Min	Typ	Max	Unit
Supply Voltage for Logic	VDD			1.65	2.8	3.3	V
Supply Voltage for Display (Supplied Externally)	VCC		Note 5 (Internal DC/DC Disable)	7.0	7.25	7.5	V
Supply Voltage for DC/DC		VBAT	Internal DC/DC Enable	3.3	-	4.2	V
Supply Voltage for Display (Generatedby Internal DC/DC)		VCC	Note 6 (Internal DC/DC Enable)	7.0	-	7.25	V
High Level Input	VIH		IOUT = 100μA, 3.3MHz	0.8×VDD	-	VDD	V
Low Level Input	VIL		IOUT = 100μA, 3.3MHz	0	-	0.2×VDD	V
High Level Output	VOH		IOUT = 100μA, 3.3MHz	0.9×VDD	-	VDD	V
Low Level Output	VOL		IOUT = 100μA, 3.3MHz	0	-	0.1×VDD	V
Operating Current for VDD	IDD			-	180	300	μA
Operating Current for VCC (VCC Supplied Externally)	ICC		Note 7	-	5	10	mA
Operating Currentfor VBAT (VCC Generatedby Internal DC/DC)		IBAT	Note 8	-	10	15	mA
Sleep Mode Current for VDD	IDD, SLEEP			-	1	5	μA
Sleep Mode Current for VCC		ICC, SLEEP		-	2	10	μA

Product Image

Contents of Reliability Tests

Item		Conditions	Criteria
High Temperature Operation	70℃, 240 hrs		The operational functions work.
Low Temperature Operation	-40℃, 240 hrs
High Temperature Storage	85℃, 240 hrs
Low Temperature Storage	-40℃, 240 hrs
High Temperature/Humidity Operation	60℃, 90% RH, 120 hrs
Thermal Shock		-40℃ <==> 85℃, 24 cycles 60 mins dwell

Facilities and Certificates

Contact Us
We love to hear about your projects, If you have any questions, we can be reached at sales2@saef.com.cn

Product Tags:

Low Cost Small Size OLED Display 0.49 Inch I2C Interface For Handheld Application Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Saef Technology Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Low Cost Small Size OLED Display 0.49 Inch I2C Interface For Handheld Application

Low Cost Small Size OLED Display 0.49 Inch I2C Interface For Handheld Application

0.49 Inch OLED Display

Handheld Application OLED Display

I2C Interface OLED Display

Low Cost Small Size OLED Display 0.49 Inch I2C Interface For Handheld Application Images